News
Steel slag contains critical raw materials. Now, a German company is recovering them.
Every year, millions of tons of steel slag are generated in Germany. Most of it ends up being used in road construction. Yet, this by-product contains valuable metals—such as vanadium, manganese, and chromium—that Europe would otherwise have to import.
A new research project by the Lower Saxony-based steel producer Salzgitter aims to specifically extract these treasures from the slag. According to the company, they are employing an approach that has never been tried before: the metals are recovered without the need to melt down the slag.
The clever aspect of this process is that it recovers not only the metals but also the remaining mineral fraction—the silicate-based material left over after leaching. This residue can, for instance, be used as an aggregate in the construction materials industry. In the best-case scenario, Salzgitter has developed a zero-waste concept.
The project is being funded by the German Federal Ministry for Economic Affairs with approximately €1.4 million and is set to run for three years. In addition to Salzgitter Mannesmann Forschung, the project partners include the Federal Institute for Materials Research and Testing (BAM), the TU Bergakademie Freiberg, the Clausthal University of Technology (TU Clausthal), and TS Elino GmbH.
Oshivela hydrogen project in Namibia, supported by the Federal Ministry for Economic Affairs and Climate Action, successfully implemented
Africa’s first green iron plant is being commissioned in Namibia, enabling the production of iron in a climate-friendly manner using hydrogen generated from renewable sources. A 12-megawatt electrolyzer, essential for this process, was delivered this week and is now being put into operation. This industrial-scale development project was successfully completed at the end of November. The German Federal Ministry for Economic Affairs and Climate Action provided funding for the "Oshivela" project—realized by a consortium of German companies, namely HyIron GmbH, TS Elino GmbH, and LSF GmbH & Co. KG—under its support program for international hydrogen projects. During his visit to Namibia in December 2022, Federal Minister for Economic Affairs Robert Habeck presented a grant notification for 13 million euros for the initiative.
Federal Minister for Economic Affairs and Climate Action Robert Habeck: Oshivela is a prime example of how the global energy transition can be advanced through international cooperation. The successful completion of this innovative project demonstrates the benefits that a global market for hydrogen-based products can offer: Namibia’s exceptional conditions for renewable energy enable competitive production costs for green iron, creating significant potential for local value creation. At the same time, the German steel industry will be able to import low-emission green iron—a crucial prerequisite for its own green transformation.
Global steel production is responsible for approximately one-eighth of worldwide CO₂ emissions, making it a significant contributor to climate change. The Oshivela plant is one of the world’s largest primary production facilities for green iron. Thanks to Namibia’s extensive iron ore deposits and favorable weather conditions, green hydrogen can be produced cost-effectively in the immediate vicinity of the extraction sites and used for climate-friendly iron production. This process not only yields green iron—a vital precursor for the decarbonization of steel production—but also contributes to the development of green value chains within Namibia. The use of climate-friendly hydrogen enables the avoidance of 27,000 tonnes of CO₂ emissions annually—an amount equivalent to roughly half of the greenhouse gas emissions generated by Namibia’s entire power sector. Plans for a second and third phase to expand the facility are already underway.
Each year, the German steel industry imports several million tons of iron produced using fossil fuels. In the future, "green" iron from Oshivela could replace such high-emission imports, as well as steel scrap. According to project representatives, numerous partners in Germany have already expressed strong interest in this cost-competitive green iron from Namibia. In the long term, Oshivela could produce up to two million tons of iron for the German steel industry, thereby supporting the transition toward a climate-friendly German steel sector.
Since 2023, a research project at the RWE site in Lingen, Germany, has also been producing green iron—using iron ore from Namibia.
21.11.2024 -Pressemitteilung -Energiewende (translated using Google Translate)
Green Iron from Namibia
Follow all the progress of the Oshivela project on LinkedIn and Facebook
The first industrial-scale production of iron with net-zero emissions, based on HyIron technology, will be implemented as part of the Oshivela project in Namibia. The first phase of the project targets an annual production of 15,000 tonnes of DRI (Direct Reduced Iron). With operations scheduled to begin by the end of 2024, Oshivela will be one of the world’s largest primary production facilities for green iron.
Follow all progress on the Oshivela project on:
Thyssenkrupp Steel: How tests for the new “steel city” are progressing
Duisburg. The construction of the direct reduction plant at Thyssenkrupp Steel comes with a price tag of around three billion euros. Here is why a pilot unit is being built first.
Nothing is being left to chance in the three-billion-euro technological leap toward hydrogen-based, climate-neutral pig iron production. Before construction begins on the new direct reduction plant, Thyssenkrupp Steel (TKS) is building a demonstration-scale facility in Bruckhausen at a cost of approximately 10 million euros. This project is part of "H2Stahl"—an initiative supported by the Federal Ministry for Economic Affairs and Climate Action (BMWK) under its "Real-world Laboratories for the Energy Transition" program. The contract has now been awarded to the Düren-based plant engineering firm TS Elino.
Thyssenkrupp Steel: Duisburg-based "real-world laboratory" to test various processes
The facility is commissioned and operated by the VDEh-Betriebsforschungsinstitut (BFI), which—in partnership with TKS—will begin testing and researching various direct reduction processes on an industrial scale starting in early 2026. Based in Düsseldorf, the institute is one of Europe’s leading organizations for applied research and development within the process industry. It provides tailored innovations spanning the entire steel production process chain. Its key areas of focus include CO₂ reduction and energy efficiency, the optimization of processes and process chains, the circular economy, and Industry 4.0 and measurement technology.
The "real-world laboratory"—which will stand up to 40 meters tall—is being built on an open site next to the Carbon2Chem technical center on Alsumer Straße, where research into utilizing carbon dioxide and other metallurgical gases to produce raw materials for the chemical industry has been underway since 2018. "The pilot plant will have a capacity of 100 kg/h of direct-reduced iron and will be connected to the utilities and infrastructure of the nearby Carbon2Chem technical center," explains TKS.
8.3.2024 Artikel der WAZ: Thyssenkrupp Steel: So laufen Tests für neue „Stahlstadt
For further reading:
07.03.2024 - Artikel des Deutschen Presseindex: Forschung für die wasserstoffbasierte Stahlproduktion
14.03.2024 - Rheinische Post: 40 Meter hohe Versuchsanlage für grüne Roheisenproduktion
02.04.2024 - Rundschau Duisburg: thyssenkrupp Steel in Duisburg: Forschung für die wasserstoffbasierte Stahlproduktion
Transitioning a steel plant to climate-neutral steel production
Steel production generates significant carbon dioxide emissions. To decarbonize steel production, researchers from Fraunhofer, TS ELINO GmbH, and Salzgitter AG are working on transitioning an existing steel plant to a climate-neutral production method. The process involves producing steel through the direct reduction of iron ore using hydrogen—completely replacing climate-damaging coke, which is traditionally used as a reducing agent. The hydrogen required is generated via electrolysis, powered by electricity from renewable energy sources. Overall, this approach could reduce carbon dioxide emissions by up to 97 percent.
Steel is a material with many qualities. It is found in almost every product that requires properties such as strength, formability, and stability. Whether in buildings, vehicles, machinery, or household appliances, steel is indispensable. However, according to the Competence Center for Climate Protection in Energy-Intensive Industries (KEI), the production of steel in Germany alone results in the emission of approximately 55 million tonnes of CO2 per year. This means the steel industry is responsible for about 28 percent of the total CO2 emissions from German industry. This is primarily due to the use of coke, which is required in blast furnaces to remove oxygen from iron ore, thereby producing pig iron.
Read more at idw - Informationsdienst Wissenschaft
PRESS RELEASE - Construction begins on Africa’s first green iron plant; foundation stone laid for the subsidized HyIron/Oshivela project
The foundation stone was laid today for the first green ironworks in Africa. During his visit to Namibia in December 2022, Federal Minister Robert Habeck presented the grant notification for the project in Windhoek. The consortium—comprising three German companies, CO2Grab GmbH, TS Elino GmbH, and LSF GmbH & Co. KG—is receiving a federal subsidy of approximately 13 million euros. The Federal Government is represented at the foundation-laying ceremony by Rainer Baake, the Special Envoy for German-Namibian Energy and Climate Cooperation.
Federal Minister Habeck: “Namibia has ideal conditions for producing green hydrogen using wind and solar energy. Since Namibia also possesses large iron ore deposits, it is possible to produce green iron there—right next to the extraction sites—by utilizing this green hydrogen. This serves as an important precursor for the decarbonization of steel production, including in Germany.”
The HyIron/Oshivela project will produce green hydrogen and use it to reduce iron ore to iron in a climate-neutral way. The resulting sponge iron—the iron itself—can then be shipped to steel mills, including those in Germany.
The project will be the first industrial, climate-neutral iron production facility on the African continent. Traditionally, iron is produced in a blast furnace by adding coke derived from hard coal—a process that releases large amounts of CO₂. To date, steel production accounts for approximately one-eighth of global CO₂ emissions, making it a significant contributor to climate change. In contrast, a direct reduction plant eliminates the need for coke, using natural gas or hydrogen as a reducing agent. Direct reduction powered by green hydrogen requires a sufficiently high potential for renewable energy—a potential that exists in Namibia.
"The project offers an opportunity to build a green hydrogen economy in Namibia, while also facilitating the decarbonization of downstream value chains. For instance, the sponge iron produced here can be used as a precursor in steel manufacturing—including in Germany—to create green steel for the production of wind turbines or vehicles," says Rainer Baake, Special Envoy for German-Namibian Climate and Energy Cooperation. "In a water-scarce country like Namibia, it is particularly important that the water used in this project is kept within a closed-loop system," Baake adds.
Production is scheduled to begin at the end of 2024. In the first phase, the facility will produce 15,000 tonnes of direct-reduced iron per year.
06/11/2023 – PRESS RELEASE – European and international energy policy
90th Company Anniversary
Düren: Mayor congratulates Elino on the company’s 90th anniversary
Düren: "Remaining at one location for such a long time is a truly impressive achievement and a testament to your commitment to our city. You are a shining example of how perseverance and professionalism can lead to great success and enable a company to navigate through crises effectively," said Mayor Frank Peter Ullrich, congratulating the management of TS Elino GmbH—a Rölsdorf-based manufacturer of industrial furnaces—on the company’s 90th anniversary.
According to the company, Elino is one of the world’s leading manufacturers of heat treatment systems and gas-processing equipment for the powder metallurgy and chemical process engineering sectors. “Our company is in a state of constant evolution, which allows us to adapt effectively to changing requirements,” explained Dr. Stephan Köhne, Managing Director of Elino. “Currently, for instance, forward-looking topics such as green energy are becoming increasingly important, and we keep environmental considerations in mind throughout our projects.”
Opening of the hydrogen direct-reduction plant in Lingen by Lower Saxony’s Minister for the Environment and Energy, Meyer
The world’s largest hydrogen-based direct reduction plant for the production of green iron is being opened in Lingen by Lower Saxony’s Minister for the Environment and Energy, Meyer.
The decarbonization of the steel industry is one of the greatest challenges in the fight against climate change.
In Germany alone, approximately 55 million tonnes of CO2 are emitted annually during steel production. This accounts for six percent of Germany’s total emissions.
Weiterlesen auf hyiron.com
Mehr zu unserer Partnerschaft mit hyiron.com
From the Press
- wallstreet-online.de: Pilot plant for the production of 'green iron' has commenced operations
- NDR: Facility for climate-neutral iron production opened in Lingen
- Berliner Morgenpost: Pilot plant for the production of green iron in Lingen